ម៉ាស៊ីនកាត់ឡាស៊ែរជាតិសរសៃទាប / ម៉ាស៊ីនកាត់ដែកថែបសន្លឹក។

ម៉ាស៊ីនកាត់ឡាស៊ែរដែកសន្លឹក

ការពិពណ៌នាផលិតផលលម្អិត។


លេខម៉ូដែល៖ECO-FIBER 3015 / 2KW ACCURLជួរធ្វើការ៖ទំហំ ១៥០០x៣០០០ ម។
CNC Control Unit:ប្រព័ន្ធអេស។ អេស។ អេស ៨០៦០៦០ ។សមត្ថភាពកាត់អតិបរមា៖16 Mm Mild Steel
Work Piece Dimensions:1525 X 3050 Mmឈ្មោះ​ផលិតផល:ម៉ាស៊ីនកាត់ឡាស៊ែរ CNC ។

Product Advantages

1. High Efficiency--The rapid cutting speed is two times higher than ordinary laser cutting machine.
2. Environment friendly--Laser cutting will not creates any gases for the special cutting technology for steel sheet.
3. Lower Consumption--The power consumption of our fiber laser cutter was reduced by 20%-30% compared wtih ordinary laser cutting machine.
4. Maintenance-free--For the fiber laser cutter, the reflect lens are no needed. It will help to save a lot of time when optical path is adjusted. The laser generator with longer lifetime which no need maintaince during usage

លក្ខណៈម៉ាស៊ីន

1. High performance.fiber transmission can make sure the same quality cutting effect in every point of the material.
2. High efficiency,fast cutting speed.photoelectric conversion rate about 35%.
3. Low gas consumption.it has the cutting technology specially for steel board and produce no gas when cutting .
4. Low power consumption .environment -friendly and energy -saving,reduce 20%-30% power compard with co2 cutting machine.
5. Maintenance-free ,fiber transmision without reflection lens,can save time in light path adjustment .fiber exerts its features better in thin metal sheet cutting.

Fiber laser cutting Machine application field
Widly applied to metal-sheet processing, stainless steel decorative engineering, advertising trademark and advertising character, high/low voltage electrical cabinet, kitchenware, metal crafwork, auto parts, farm machinery, medical instrument, sports equipment,environmental protecion equipment, elvvator apparatus, central air conditioning, metal craftwork, hardeware, tool and gauge etc...

ឧបករណ៍ស្តង់ដារ៖

•ឧបករណ៍ត្រួតពិនិត្យអេហ្វអេសអេច ៨០៦០៦០
•IPG YLS-3000W Ytterbium Laser Resonator
ឧបករណ៍ផ្លាស់ប្តូរកំរាលទ្វេរដងស្វ័យប្រវត្តិ (តុបិទ)
•ប្រព័ន្ធរ៉ាក់ស៊ីននិងភេននីងឌីស (ផលិតនៅប្រទេសអាឡឺម៉ង់)
•ប្រព័ន្ធរ៉ាឌីនរឺឡាំងខេស៊ី / ខេម
• ប្រភព​ពន្លឺ
ម៉ាស៊ីនកំដៅ
•កញ្ចក់ការពារទាបចំនួន ៣
អាដាប់ធ័រណូហ្សែល ៣ គ្រឿង
•ប្រព័ន្ធលេខក្បាលដែលបានក្រិតតាមខ្នាតដោយស្វ័យប្រវត្តិ
•កែវថតដែលមានប្រវែងផ្តោតអារម្មណ៍ ៥.៩”
•ប្រព័ន្ធប្រមូលស្លាយឆ្លាត / ឧបករណ៍ចាប់ជីប
•ប្រព័ន្ធបញ្ជូនធ្នឹមហ្វាយប៊ឺរ (ខ្សែកាបអុបទិក)
ប្រតិបត្តិការជាមួយទាំងឧស្ម័ន N2 និង O2 (កាត់)
ប្រព័ន្ធតម្រឹមទីតាំងផ្ទះ
•ឧបករណ៍ជ្រើសរើសហ្គាសជំនួយ
ការព្រមានឆ្លុះបញ្ចាំងដោយស្វ័យប្រវត្តិ
•អំពូលធ្វើការ
• ៥ ខ្សែនីមួយៗដូចខាងក្រោមៈ (១.០ ម។ ម។ ម។ ម។ ម។ ១.៥ ម។ ម។ ម។ ម ២.៥ ម។ ម។ ម ២.៥ ម។ ម

ការបញ្ជាក់។


គំរូ។អេកូអេហ្វហ្វីស 3015 / 2KW ។
អង្គភាពត្រួតពិនិត្យ CNC ។ប្រព័ន្ធអេស។ អេស។ អេស ៨០៦០៦០ ។
អ័ក្ស X (Rack & Pinion)3000 ម។
អ័ក្ស Y (Rack & Pinion)១៥០០ ម។ ម
អ័ក្ស Z (វីសគ្រាប់បាល់)១០០ ម។
 

សមត្ថភាពកាត់អតិបរមា។

ដែកថែបស្រាល។១៦ ម
ដែកអ៊ីណុក។8 ម។
អាល់ឡៃមីម។៦ ម
វិមាត្របំណែកការងារ។1525 x 3050 មម។
ឆ្លងកាត់យ៉ាងលឿន (អ័ក្ស X និង Y)១០៥ ម៉ែត / នាទី។
ការបង្កើនល្បឿន។2.5G (25m / s2)
ល្បឿនវ៉ិចទ័រ។១៤៨ ម / នាទី។
ភាពត្រឹមត្រូវនៃទីតាំងពេញលេញ។± ០,០៨ ម
ភាពអាចដំណើរការឡើងវិញបាន (អ័ក្ស X និង Y)± ០,០៣ ម
អតិបរមា។ សមត្ថភាពផ្ទុក។២៤៥០ គីឡូក្រាម។
ប្រព័ន្ធ CNC ដំណើរការខ្ពស់។FAGOR 8060 មកពីប្រទេសអេស្ប៉ាញម៉ាក។
ថាមពលឡាស៊ែរ។IPG YLS-2 kW មកពីប្រទេសអាឡឺម៉ង់។
ម៉ូទ័រដ្រាយវឺរទ័រដែលមានមុខងារខ្ពស់។FAGOR មកពីប្រទេសអេស្ប៉ាញម៉ាក។
ក្បាលកាត់ឡាស៊ែរ។PRECITEC មកពីប្រទេសអាល្លឺម៉ង់។
អ្នកជំរុញកំលាំងចិត្ត។STOBER មកពីប្រទេសអាឡឺម៉ង់។
ឈ្មោះ​ផលិតផលម៉ាស៊ីនកាត់ឡាស៊ែរ CNC ។

 

ផលិតផលដែលពាក់ព័ន្ធ។